Accessories - Graco Dyna-Star 236-753 Instructions And Parts List

USE ONLY GENUINE GRACO PARTS AND ACCESSORIES
MUST BE PURCHASED SEP ARATELY.
GROUNDING CLAMP 103–538
GROUNDING WIRE
25 ft (7.6 m) long
ASSEMBLY TOOL 181–619
Required for reassembling the reciprocator.
SUCTION HOSE KIT 236–054
Consists of drum tube and hose. Can use with low–level
cutoff 203–688.
LOW LEVEL CUT–OFF
Closes pump intake valve when fluid supply is depleted to
prevent air from being drawn into the pump. Used primar-
ily for metered installations.

Accessories

208–950
203–688
WALL BRACKET 236–778
Provides support to mount the 1/4:1 Dyna-Star on a wall.
REPAIR KIT 236–861
Provides seals and o-rings for the Dyna-Star.
GRACO APPROVED HYDRAULIC FLUID
169–236 5 gallon (20 liter)
207–428 1 gallon (3.8 liter)
PUMP OUTLET DRAIN VALVE
5000 psi (310 bar) Maximum Working Pressure
3/8 npt (mbe)
HYDRAULIC FLUID CONTROL
500–1500 psi (35–105 bar) Working Pressure Range
Provides pressure regulation, flow regulation, and pump
isolation. See Fig 1 for typical installation.
210–658
236–864