8.5.
Removal of A-Board
1. Remove the HX-Board Block.
(Refer to Removal of HX-Board)
2. Disconnect the connectors (A5, A11, A13, A16, A22,
A25).
3. Remove the flexible cables from the connectors (A1, A20,
A31, A32).
4. Remove 4 screws and then remove A-Board.
8.6.
Removal of Fan
1. Disconnect the Fan Relay Connectors.
2. Remove 2 screws and then remove the Fan Block (A)
and the Clamper.
3. Remove each 1 screw and then remove the Fan from the
Fan Fixed Metal.
4. Remove each 4 Sponges (Fan Corner) from the Fan.
5. Reassemble the Fans in reverse order.
6. Stick the Fan Sponges around the Fan.
Note:
The Fan Sponge is not re-usable.
Please use a new one when Fan exchange.
7. Disconnect the Fan Relay Connectors.
8. Remove 4 hooks and then remove Duct Barrier (A) Assy,
Duct Barrier (B) Assy.
21
TH-50PF50E