Panasonic TH-50PF50E Service Manual page 25

4. Pull the bottom of the Plasma Display Panel forward
(arrow1).
5. Slide the Plasma Display Panel and then remove the
Plasma Display Panel (arrow2).
8.16.1. Removal of Front Glass
1. Remove 24 screws and then remove the Fixed Angle
(left, right, upper-rear, bottom-rear).
2. Remove the Front Glass.
Note: when fixing Fixed Angle (upper-rear, bottom-
rear)
• Firstly screw on 6 screws (1-2) in order.
Note: when Front Glass is exchanged
• Paste the Front Glass Sponges in order along each
Fixed Angles left and right, upper and bottom.
Note
• The sponges are parts which cannot be recycled. Please
use the new article when you exchange the Front Glass.
8.16.2. Removal of V1-Board and V2-Board
1. Remove the Front Glass.
(Refer to remove of Front Glass).
2. Remove the Fixed Angle (bottom-front).
3. Remove 2 screws (C).
4. Disconnect the connector (V11).
5. Remove 1 hook and then remove V1-Board
6. Remove 2 hooks and then remove the Power Button
Shield.
7. Remove 3 hooks and then remove the Power Button and
Power Button Spring.
8. Disconnect the connector (V22) and then remove V2-
Board.
9. Remove 2 hooks and then remove the 5 Key Button from
V2-Board.
8.16.3. Removal of Cabinet Assy
1. Remove the Front Glass.
(Refer to Removal of Front Glass)
2. Remove V1-Board and V2-Board.
(Refer to Removal of V1-Board and V2-Board)
25
TH-50PF50E