Related Documentation; Training Courses - National Instruments NI 6608 User Manual

About This Manual

Related Documentation

Note You can download these documents at

Training Courses

NI 660x User Manual
The following documents contain information that you might find helpful
as you use this help file:
• NI 660x Specifications—This document contains specifications for the
NI 6601, NI 6602, and NI 6608 devices. It available for download at
ni.com/manuals
• DAQ Getting Started Guide—This guide describes how to install the
NI-DAQ 7.x software and the DAQ device, and how to confirm that the
device is operating properly.
• NI-DAQmx Help—This help file contains information about using
NI-DAQmx to program National Instruments devices. NI-DAQmx is
the software you use to communicate with and control your DAQ
device.
• Measurement & Automation Explorer Help for NI-DAQmx—This help
file contains information about configuring and testing DAQ devices,
SCXI devices, SCC devices, and RTSI cables using Measurement &
Automation Explorer (MAX) for NI-DAQmx, and information about
special considerations for operating systems.
• DAQ Assistant Help—This help file contains information about
creating and configuring channels, tasks, and scales using the DAQ
Assistant.
• PXI Hardware Specification Revision 2.1—This document introduces
the PXI architecture and describes the electrical, mechanical, and
software requirements for PXI.
If you need more help getting started developing an application with NI
products, NI offers training courses. To enroll in a course or obtain a
detailed course outline, refer to
.
ni.com/manuals
ni.com/training
viii
.
.
ni.com