JVC RD-E861B-DAB Instruction Manual page 6

Manual clock setting
NOTE: The clock will update automatically if you can receive a DAB+ signal in your location. In order to
synchronize to the current local time make sure the unit is placed near the DAB+ signal for a short period
of time.
• In Standby mode, press CLOCK on the remote control. The hour digits flash on the display.
to adjust the hour digits, then press CLOCK to confirm. The minute digits will
• Press /
flash on the display.
• Press / to adjust the minute digits, then press CLOCK to confirm.
Daily timer
Set a time for the unit to turn on and off each day.
• Press and hold TIMER on the remote control to start setting.
• Set all items one by one: <On Timer>, <Off Timer>, <SOURCE>, and <VOLUME>. To set,
use / . To confirm, press TIMER.
To enable/disable the Daily timer, press TIMER. If the timer is on, the
display.
Equalizer
During playback, press EQ on the remote control to select a desired EQ mode.
System reset
During DAB mode, open the CD Disk tray then press and hold STOP on the unit until the
display shows <Restarting...FACTORY RESET>. After the unit is reset, it will return to DAB
mode.
NOTE: After the system reset, all the tuned stations, and FM/DAB preset stations will be erased.
PRESETS
You can store up to 30 of your favorite DAB or FM stations to the memory. This will enable you
to access your favorite stations quickly and easily. To store a preset, you must first be listening
to the station that you would like to save.
Storing to Presets 1 ~ 9
• Press and hold the number button 1 ~ 9 until the display shows <Preset # stored>.
Storing to Presets 1 ~ 30
• Press and hold PRESET, the display will show <Save to P#>.
• Press / to select your desired preset station number, then press SELECT to confirm.
• The station will be stored in few seconds and the display will show <Preset # stored>.
Recalling Presets 1 ~ 9
• Press the number button 1 ~ 9 to select the station you want to listen to.
Recalling Presets 1 ~ 30
• Press PRESET.
• Press / to select your desired preset station number. Then press SELECT to confirm.
NOTE: When listening to a preset station, the display shows its number <P#>.
EN
icon will be on the