Specifications - JVC RD-E861B-DAB Instruction Manual

BLUETOOTH
• In Bluetooth mode, <BT LINK> will flash on the display. This means the unit is not paired
with any Bluetooth device.
• Activate Bluetooth of mobile phone and search for device name RD-E861B-DAB then
connect it. If the pairing is successful, <BT LINK> will be solid on the display.
Playback
• Adjust the volume to your desired level.
• Press to play/pause the playback.
• Press / to skip to the previous/next track.
NOTE: The operational range between the unit and the device is approximately 8 meters.
If the signal strength is weak, your Bluetooth receiver may disconnect, but it will re-enter pairing mode
automatically.
For better signal reception, remove any obstacles between the unit and the Bluetooth device.
Compatibility with all devices and media types is not guaranteed.
Some mobile phones with Bluetooth functions may connect and disconnect as you make and end calls.
This is not an indication of a problem with the unit.

SPECIFICATIONS

GENERAL
Power Supply
Power consumption
Standby Power consumption
Weight
Dimensions
Operation temperature
RADIO SECTION
FM Frequency Range
DAB+ Frequency Range
Presets
CD SECTION
Frequency Response
BLUETOOTH SECTION
Bluetooth
BT Frequency Range
EIRP
AUDIO SECTION
Power output
WE RESERVE THE RIGHT TO CHANGE TECHNICAL SPECIFICATIONS.
PACKAGE CONTENTS
DAB+ All-in-one Audio System, Remote Control, User manual
AC 100 ~ 240 V; 50/60 Hz
< 32 W
< 1 W
Approx. 2,6 kg
350 x 120 X 210 mm
+5°C ~ +35°C
87,5 – 108 MHz
174 – 240 MHz
DAB+ 30 / FM 30
20 Hz – 20 kHz
V 5.0 - Supports A2DP, AVRCP profiles
2402 – 2480 MHz
4 dBm
2 x 5 Watts RMS
EN