Table of Contents
Advertisement
Menu Button
The MENU button is a small button on the remote control and the large button on the
projector control pad.
Press the Menu button and then use the up, down, right or left arrow indicators (LM) to
display OnView
E
Position Button
N
The POSITION button is on the remote control only.
G
L
I
S
H
NOTE:
Magnify Buttons
The MAGNIFY buttons are on the remote control only.
Reset Button
The RESET button shown with the arrow and dot icon is on the projector only. The
RESET button on the remote control has no marking but is labeled RESET.
Volume Buttons
The VOLUME buttons are on the remote control only.
Mute Button
Blank Button
The BLANK button is on the remote control only.
Freeze Button
The FREEZE button is on the remote control only.
7
ViewSonic PJ853
menus and adjust or select a menu item.
®
Press this button to adjust the position of the screen image. After pressing the
Position button use the up, down, right or left arrow indicators. (LM).
Use the Position button when the input is from a computer (RGB).
-
Position only works on a magnified image.
The Magnify buttons are used to zoom in on part of the projected image.
Use the + button to enlarge the projected image.
-
Use the - button to decrease the projected image.
-
Use the OFF button to turn off magnification.
-
Press the Reset button to restore the factory default settings.
Use Reset to restore the factory default settings if you have made several
-
adjustments to the projected image and are not satisfied with the result and
want to start over.
Use the Volume buttons to adjust the loudness of the audio signal.
The up indicator increases the volume.
-
The down indicator decreases the volume.
-
Use the Mute button to temporarily turn off the audio.
Use the Blank button to display a blank screen showing only the background color.
Use the Freeze button to freeze (or hold) an image on screen.
Advertisement
Table of Contents
