Table of Contents
Advertisement
Timer Button
The TIMER button is on the remote control. You can set the timer from the OPTIONS
menu explained in the next section.
Use the Timer button to activate the on-screen timer.
Press once to display the time on the lower left part of the screen.
-
Press again to turn off the display.
-
Auto Button
Use the Auto button to automatically adjust the vertical position and horizontal
position, phase, and size.
OnView Indicators
Use the OnView
®
menus shown below to adjust the projected image.
To access and adjust the OnView screens do the following:
1
Press the MENU button on the projector control pad or remote control to access on-screen
options and display the SETUP Main Menu.
Press the ARROW buttons, as explained below, to select and adjust options that are displayed on
2
the screen.
After you have used the ARROW buttons to adjust a value, the value will automatically
NOTE:
apply after a few seconds.
Setup Main Menu
SETUP
INPUT
IMAGE
BRIGHT
CONTRAST
V POSIT
100
H POSIT
100
H PHASE
H SIZE
800
COLOR BAL R
COLOR BAL B
ASPECT
SETUP
INPUT
IMAGE
BRIGHT
CONTRAST
SHARPNESS
COLOR
TINT
COLOR BAL R
COLOR BAL B
ASPECT
SETUP Main Menu RGB
OPT.
The setup RGB menu displays 9 adjustment options.
0
1
Press an arrow button (LM) to display the menu.
-2
2
Press the right or left arrow buttons to select a menu option other than Setup.
+1
3
Press the up and down arrow buttons to move through the Setup menu options.
4
After a menu option has been selected, use the right or left arrow buttons to
0
0
increase or decrease the value of the selected option.
SETUP Main Menu Video
OPT.
The Video setup menu displays 8 adjustment options.
0
1
Press an arrow button to display the menu.
+1
+1
2
Press the right or left arrow buttons to select a menu option other than Setup.
0
3
Press the up and down arrow buttons to move through the Setup menu options.
0
0
4
After a menu option has been selected, use the right or left arrow buttons to
0
increase or decrease the value of the selected option.
Use the arrow buttons on the projector control pad or on the remote control to
move through the menu options and to increase or decrease the value of a selected
option.
ViewSonic PJ853
E
N
G
L
I
S
H
8
Advertisement
Table of Contents
