Table of Contents
Advertisement
Effect Types and Parameters
[ DELAY ]
FILTER DELAY This effect filters a delayed sound.
TIME
MODE
REPEAT
MIX
PITCH DELAY This effect applies pitch shift to a delayed sound.
PITCH
TIME
REPEAT
MIX
This hold delay effect is controlled using the foot switch. When you press the foot switch,
HOLD DELAY
the effect turns on, and when you release it, the effect sound is held.
TIME
MODE
REPEAT
HI-DMP
TONE
MIX
P-P
TAIL
Sets the delay time.
Sets the delay time range.
When metronome is chosen, the delay time is synchronized to the tempo.
Adjusts the number of repeats.
Adjusts the amount of effected sound that is mixed with the original sound.
Sets volume of pitch shift applied to delayed sound.
Sets the delay time.
Adjusts the number of repeats.
Adjusts the amount of effected sound that is mixed with the original sound.
Sets the delay time.
Sets the delay time range.
When metronome is chosen, the delay time is synchronized to the tempo.
Adjusts the number of repeats.
Adjusts the treble attenuation of the delay sound.
Adjusts the tone.
Adjusts the amount of effected sound that is mixed with the original sound.
Sets delay output to mono or Ping Pong.
When ON, effect sound continues even after effect is turned off. When OFF, effect sound stops
right when effect is turned off.
17
1 - 2000
SHORT,
LONG,
0 - 100
0 - 100
-12 - 12
1 - 2000
0 - 100
0 - 100
1 - 4000
SHORT,
LONG,
0 - 100
0 - 10
0 - 100
0 - 100
MONO, P-P
OFF, ON
Advertisement
Table of Contents
