Advertisement
RECORDING TV PROGRAMS.
Notice
To change to channel 3 or 2 on your TV from the
channel on which you have been viewing something
from the video recorder, be sure to press TV/VTR first
and then change to channel 3 or 2 on your TV. If
TV/VTR is pressed after channel 3 or 2 is set on your
TV, you might not get a picture. In this case, change
your TV channel to another channel and then come
back to channel 3 or 2.
In case you want to record a tape which is to be
played back on another recorder from the very
beginning of the tape, run the tape for about 15
seconds before starting-recording. Otherwise you may
miss the starting point during playback on the other
machine.
NOTE
ABOUT THE SUPER BETA SYSTEM
Normally, keep this switch at the ''ON"' position to
obtain high picture quality recordings and playback.
Tapes recorded in other non-SuperBeta VCRs can be
played on SuperBeta VCRs.
Tapes recorded in SuperBeta can be played on other
non-SuperBeta VCRs. However, some over-modulation
noise may appear in the picture during playback. If you
intend to play back on other non-SuperBeta VCRs, then
set the SUPER BETA
switch to "OFF" position when
making your recordings.
TO RECORD ONE TV. PROGRAM
VIEWING ANOTHER)
oo
You can record a TV program selected on the recorder
while viewing another TV program on your TV.
1 To start recording the TV program, follow the procedu:
in "Recording TV programs''.
2 Press TV/VTR so that the VTR indicator disappears.
3 Select the channel you want to view on the TV.
Advertisement
