Advertisement
~ RF UNIT
3CH
4CH
INPUT SELECT
3
CHANNEL + /—
channel is not active in your area.
@Press POWER. The indicator lights up.
@nsert the cassette with the
round window to the left.
@Press Bm PLAY.
@Press TV/VTR to display the
VTR indicator in the window.
@Check that INPUT SELECT
is set to TUNER, then select
an active channel in your
area with CHANNEL
+/-—
on the recorder.
@Turn on the TV.
receiver.
—
Check!
Check that the display on the screen changes when
you stop the tape by pressing # STOP on the
recorder. (To eject the cassette, press & EJECT.)
lf the program does not change, repeat the
preceding steps.
Check!
Check that the program displayed on the screen
changes when a different channel is selected on
the recorder.
if the program does not change, repeat the
preceding steps.
Advertisement
