Advertisement
Your recorder is capable of receiving VHF channels 2-13,
UHF channels 14-69 and cable TV channels 14-36 (A to
W) and 66-125 (A-5 to A-1 and W+30 to W+84). See
cable TV channel chart on page 24. You can preset 14
channels so that only the desired channels will appear in
sequence when you select a channel later on.
Display window
Buttons for TV channel presetting
PRESET
_HNE
Co
ao
a
TUNING
TIMER/TUNER
~ CHANNEL +
NEXT
CLEAR/RESET
i
a.
a
Oa
|
BEFORE PRESETTING
eTurn on the recorder and TV.
«Make sure that the TV is set to the correct channel
(channel 3 or 4) for the recorder.
¢Set INPUT SELECT to TUNER.
PRESETTING CHANNELS
1 Press PRESET.
The channel memory position will blink.
2 Select a channel memory position with CHANNEL + /—
for the desired channel to be tuned in.
3 Press NEXT.
The band indicator and the channel scanning indicator
will blink.
4 Tune in the desired channel.
Press CHANNEL + to tune in a higher-numbered
channel, or — to tune in a lower-numbered channel.
If the first channel appearing on the screen is not the
one you wish, repeat pressing CHANNEL + or — until
the desired channel appears.
5 Press NEXT.
The channel number display will blink.
6 Change the channel! number display to identify the
channel being received.
Press CHANNEL + for a higher number, or — for a
lower number.
7 Press NEXT.
The current time will reappear.
Repeat steps 1 to 7 for other channel memory positions
to be preset.
Check in the window during presetting
The band in which
channels are being
tuned in (L,H,U)
Channel memory position
Channel number display
Appears when PRESET
is pressed.
Indicates the AFT circuit
is activated.
indicates the approximate
location of the channel
scanned in the band.
Advertisement
