Advertisement
f OPERATIONS |
RECORDING
'
INPUT SELECT
Preparation
Turn on the TV and select the channel for the recorder
or select the input for the recorder.
eCheck the position of the selectors.
INPUT SELECT to TUNER
SUPER BETA to ON
REC LEVEL to
To stop recording, press @ STOP.
When the tape reaches its end, it will be rewound to the
beginning.
To eject the cassette, press "& EJECT.
To turn off the power, press POWER.
Note
The power can be automatically turned on by inserting a
cassette without pressing POWER.
SUPER BETA
Numbers in the illustration show the sequence of operation.
REC LEVEL
1 Press POWER.
The power indicator will light up.
2 Insert a cassette.
3 Select the recording tape speed, {HT or (ATL, with
REC MODE.
The length of recording time differs for each mode.
Refer to the chart on page 6.
4 Press TV/VTR so that the VTR indicator appears.
:
5 Select the channel to be recorded with CHANNEL + /-.}
6 Press RECORD. The RECORD indicator will light and
recording will begin.
To stop the tape momentarily during recording
Press #8 PAUSE. The indicator above the button lights.
The TV program can still be seen on the TV, but the
picture will not be recorded. To resume recording, press
iE PAUSE again.
To protect the video heads and the tape, the pause mode
will be automatically released after about 8 minutes and
recording will stop.
Multichannel TV sound (MTS) broadcasts cannot be
recorded with this recorder.
Advertisement
