Recording A Program - Sony MICROMV DCR-IP5 Operating Instructions Manual

Recording a program

When using the A/V connecting cable
You can record or edit a program from another VCR that has video/audio outputs. Use
your camcorder as a recorder.
1 Switching the video input jack of the A/V connecting cable
The supplied A/V connecting cable is equipped with the S video plug and the video
plug. You have to select either of the jacks in the menu settings. The default setting is
VIDEO. If the setup is not necessary, go to "2 Making a recording" on page XX.
(1) Set the POWER switch to VCR.
(2) Select FN, then press the center z on the control button. The PAGE1 screen
(3) Select MENU, then press the center z on the control button. The menu
(4) Select VIDEOINPUT through
(5) Select VIDEO or S VIDEO, then press the center z on the control button.
(6) Press DISPLAY to turn off the menu. Pressing DISPLAY again displays the
84
appears.
appears.
button.
video control buttons.
2
FN
3
MENU
4,5
VCR SET
VIDEOINPUT VIDEO
RETURN
, then press the center z or B on the control
VCR SET
VIDEOINPUT VIDEO
RETURN S VIDEO
6
1
POWER
CAMERA
MEMORY/
(CHG)
NETWORK
OFF
VCR
ON
MODE