Sony MICROMV DCR-IP5 Operating Instructions Manual page 110

Using a "Memory Stick" – introduction
Inserting a "Memory Stick"
Insert a "Memory Stick" in the "Memory Stick" slot as far as it can go with the v mark
facing up as illustrated.
Ejecting the "Memory Stick"
Slide the MEMORY EJECT lever in the direction of the arrow.
While the access lamp is lit or flashing
Do not shake or strike your camcorder because your camcorder is reading the data from
the "Memory Stick" or recording the data on the "Memory Stick." Do not turn the
power off , eject a "Memory Stick" or remove the battery pack. Otherwise, the image
data breakdown may occur.
If "
Remove the "Memory Stick," then insert it again. If the message is indicated, the
"Memory Stick" may be corrupted. Use another "Memory Stick."
110
MEMORYSTICK ERROR" is displayed
Access lamp
"Memory Stick" slot
MEMORY EJECT