Table of Contents
Advertisement
Searching the scene – Multi-picture search
When controlling from the Remote Commander
You can use the MULTI SRCH and X/x/C/c/DECISION buttons.
MULTI SRCH
If the tape has a blank portion between recorded portions
The multi-picture search function may not work correctly.
The number of thumbnails stored in one cassette
About 400 thumbnails can be stored.
The number of thumbnails that can be searched in one scanning
This is up to 11.
When you press MULTI SRCH on the Remote Commander
The MULTISRCH screen appears.
During searching
The other functions of this camcorder do not work.
The thumbnail images displayed on the MULTISRCH screen
You cannot modify these thumbnail images.
When you use the multi-picture search function with the digital effect activated
The digital effect will be canceled.
Some of 11 thumbnails may not be displayed in the following cases:
•The recorded images and scenes are less than 11 on the searched portion.
•When scanning the tape recorded over the previous recordings.
•When you have erased all the MICRO cassette memory of the tape (p. XX).
X/x/C/c/DECISION buttons
These buttons function the
same as the control button on
the camcorder.
The control button
73
Advertisement
Table of Contents
