Recording - Basics; Recording A Picture - Sony MICROMV DCR-IP5 Operating Instructions Manual

— Recording – Basics —

Recording a picture

Your camcorder automatically focuses for you.
(1) Remove the lens cap and pull the lens cap string to fix it.
(2) Install the power source. See "Step 1 Preparing the power supply" for more
(3) Insert a cassette. See "Step 3 Inserting a cassette" for more information (p. 25).
(4) Press OPEN, then open the LCD panel.
(5) Set the POWER switch to CAMERA. The CAMERA lamp lights up and your
(6) Press START/STOP. The STBY indicator flashes. Then, the REC indicator
5
POWER
CAMERA
MEMORY/
NETWORK
VCR
6
START/STOP
After recording
(1) Set the POWER switch to OFF (CHG).
(2) Close the LCD panel.
(3) Eject the cassette.
(4) Remove the power source.
28
information (p. 18).
camcorder is set to the standby mode.
appears instead and the camcorder starts recording. The camera recording
lamp located on the front of your camcorder lights up. To stop recording, press
START/STOP again.
Microphone
(CHG)
OFF
4
ON
MODE
3
40min
REC 0:00:01
1
2
Camera recording
lamp