Graphics-Card Fan; Removing The Graphics-Card Fan - Dell Alienware x16 R2 Owner's Manual

Steps
1. Align and place the processor fan into the slot on the palm-rest and keyboard assembly.
2. Replace the two screws (M2x4) that secure the processor fan to the palm-rest and keyboard assembly.
3. Route the speaker cable and the antenna cable through the routing guides on the bottom of the processor fan.
4. Connect the processor-fan cable and speaker cable to the system board.
Next steps
1. Install the wireless card.
2. Install the base cover.
3. Follow the procedure in

Graphics-card fan

Removing the graphics-card fan

CAUTION: The information in this removal section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in
2. Remove the base cover.
About this task
The following images indicate the location of the graphics-card fan and provide a visual representation of the removal procedure.
80
After working inside your
Before working inside your
computer.
computer.