Dell Alienware x16 R2 Owner's Manual page 118

Table of Contents

Advertisement

Table 39. System setup options—Passwords menu (continued)
Passwords
Strong Password
Password Configuration
Password Bypass
Password Changes
Allow Non-Admin Password Changes
Non-Admin Setup Changes
Admin Setup Lockout
Recovery Password
118
Dell Technologies recommends that only computer lessors use the owner password.
The Strong Password feature enforces stricter rules for administrator, owner, and
computer passwords.
When enabled, the following rules are enforced -
● The minimum length of the password is set to eight characters.
● The password is required to include at least one upper case and one lower case
character.
NOTE: These requirements do not affect the hard drive password.
By default, the Strong Password option is enabled.
For additional security, Dell Technologies recommends keeping the Strong
Password option enabled as it requires passwords to be more complex.
The Password configuration page includes several options for changing the
requirements of BIOS passwords. You can modify the minimum and maximum length
of the passwords and require passwords to contain certain character classes (upper
case, lower case, digit, special character).
Dell Technologies recommends setting the minimum password length to at least eight
characters.
The Password Bypass option allows the computer to reboot from the operating
system without entering the computer or hard drive password. If the computer has
already booted to the operating system, it is presumed that the user has already
entered the correct computer or hard drive password.
NOTE: This option does not remove the requirement to enter the password after
shutting down.
By default, the Password Bypass option is enabled.
For additional security, Dell Technologies recommends keeping the Password
Bypass option enabled.
The Allow Non-Admin Password Changes option in BIOS setup allows an end
user to set or change the computer or hard drive passwords without entering the
administrator password. This gives an administrator control over the BIOS settings but
enables an end user to provide their own password.
By default, the Allow Non-Admin Password Changes option is disabled.
For additional security, Dell Technologies recommends keeping the Allow Non-
Admin Password Changes option disabled.
The Non-Admin Setup Changes option allows an end user to configure the wireless
devices without requiring the administrator password.
By default, the Non-Admin Setup Changes option is disabled.
For additional security, Dell Technologies recommends keeping the Non-Admin
Setup Changes option disabled.
The Admin Setup Lockout option prevents an end user from even viewing the BIOS
setup configuration without first entering the administrator password (if set).
By default, the Admin Setup Lockout option is disabled.
For additional security, Dell Technologies recommends keeping the Admin Setup
Lockout option disabled.
The Recovery Password can be used when a system owner forgets the administrator,
system, or hard drive password. You can get an unlock code from Dell Support over

Advertisement

Table of Contents
loading

This manual is also suitable for:

P120f

Table of Contents