Battery Cable; Removing The Battery Cable - Dell Alienware x16 R2 Owner's Manual

Battery cable

Removing the battery cable

CAUTION: The information in this removal section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the battery.
NOTE: If the battery is disconnected from the system board for service, then there is a delay during boot as the computer
undergoes RTC battery reset.
About this task
The following images indicate the location of the battery cable and provide a visual representation of the removal procedure.
Steps
1. Turn the battery over and peel the battery cable from the battery.
54
Before working inside your computer.