(2) PU connector communication system configuration
Connection of a computer to the inverter (1:1 connection)
FR-PU07
RJ-45 connector 2)
Communication cable 1)
Combination of computer and multiple inverters (1:n connection)
interface/terminals
RS-232C
* The inverters may be affected by reflection depending on the transmission speed or transmission distance. If this reflection hinders communication, provide a
terminating resistor. If the PU connector is used to make a connection, use a distributor since a terminating resistor cannot be fitted. Connect the terminating
resistor to only the inverter remotest from the computer. (Terminating resistor: 100)
REMARKS
Refer to the following when fabricating the cable on the user side.
Examples of products available on the market (as of February 2015)
Product
1) Communication cable
2) RJ-45 connector
Do not use pins No. 2, 8 of the communication cable. (Refer to page 181.)