Advertisement
3. Mounting the Lens
CAUTION:
Always set the Flange-back Adjusting Ring to
fully clockwise by loosing the screw on the ring
before
mounting
the lens otherwise
the inner
glass and CCD image sensor could be damaged
by the lens.
(1)
Mount the lens by turning it clockwise onto the lens
mount of the camera.
(2)
Connect
the
lens
cable
to
the
Auto
Iris Lens
Connector on the camera
when the Auto Iris Lens
is used.
The mounted lens is one of the listed on page 14
or the one requires the DC control signal for auto
iris control.
VIDEO:
The mounted lens requires video signal for auto
iris control.
St
Advertisement
