Advertisement
CONNECTION
Power Cable
Keep the camera power switched off during installation.
A: WV-CL500
1.
Connect the AC Power Cord (13) to a 50Hz electrical
outlet 240V AC for WV-CL500/A and WV-CL500/B,
220V AC for WV-CL500/G.
B: WV-CL502E
1.
A power supply of 12V DC is required.
2.
Connect the power cable to the 12C DC Power
Terminal Strip (14) on the rear panel of the camera.
Be careful not to obstruct the operation of camera
ON/OFF switch.
t2V DC
(10.8V - 16V)
Resistance of copper wire at 20°C
Copper
miata
#24
wire size
(AWG)
(0.22mm2)
Resistance
ohms/m
0.078
e
Calculation
method
of maximum
cable length be-
tween camera and power supply.
16V DC>
Va — (Rx 0.55 x L) > 10.8V DC
L: Cable length (Meter)
R: Resistance of copper wire (QQ/m)
Va: DC voltage of power supply
VA—
12
L standard
= —~———
(Meter)
0.55xR
VA — 16
L minimum
= ——————
(Meter)
0.55xR
VA — 10.8
L maximum
= ————~—— (Meter)
0.55xR
Caution:
To Prevent fire or shock hazard, the UL listed wire
VW-1, style 1007 should be used for the cable for
DC 12V Input Terminal.
Advertisement
