MSI MS-CF02 User Manual page 71

▶ Console Redirection Settings (COM1)
This option appears when Console Redirection is enabled.
» Terminal Type
To operate the system's console redirection, you need a terminal supporting ANSI
terminal protocol and a RS-232 null modem cable connected between the host system
and terminal(s). You can select emulation for the terminal from this setting.
[ANSI]
[VT100]
[VT100Plus]
[VT-UTF8]
» Bits per second, Data Bits, Parity, Stop Bits
These setting specifies the transfer rate (bits per second, data bits, parity, stop bits) of
Console Redirection.
» Flow Control
Flow control is the process of managing the rate of data transmission between two
nodes. It's the process of adjusting the flow of data from one device to another to
ensure that the receiving device can handle all of the incoming data. This is particularly
important where the sending device is capable of sending data much faster than the
receiving device can receive it.
» VT-UTF8 Combo Key Support
This setting enables or disables the VT-UTF8 combination key support for ANSI/VT100
terminals.
» Recorder Mode, Resolution 100x31
These settings enables or disables the recorder mode and the resolution 100x31.
» Putty KeyPad
PuTTY is a terminal emulator for Windows. This setting controls the numeric keypad for
use in PuTTY.
Extended ASCII character set.
ASCII character set.
Extends VT100 to support color, function keys, etc.
Uses UTF8 encoding to map Unicode characters onto one or more bytes.
71
Security