Table of Contents
Advertisement
Jumper Name
Default Setting
JATX1
JVDD1
JCASE5
AT/ ATX Mode Select Jumper
1-2: ATX (Default)
1
2-3: AT
LVDS Power Jumper
1-2: 3.3V (Default)
1
2-3: 5V
Chassis Intrusion Jumper
This connector connects to the chassis intrusion
switch cable. If the chassis is opened, the chassis
intrusion mechanism will be activated. The system
Normal
(default)
will record this status and show a warning message
on the screen. To clear the warning, you must enter
the BIOS utility and clear the record.
Description
41
Jumpers
Advertisement
Table of Contents
