MSI MS-CF02 User Manual page 65

» User consent
• User Opt-in
[None]
[KVM]
[ALL]
• Opt-in Configurable from Remote IT
Enables or disables remote User's ability to set the User Opt-in.
» Password Policy
This feature determines when the user is allowed to change the Intel
through the network.
[Default Password Only]
[During Setup And Configuration]
[Anytime]
⚠
Important
∙ The Password Policy involves 2 passwords: the Intel® MEBx password (local),
entered when physically at the system, and the network password (remote), used
for accessing an Intel ME enabled system through the network. By default, they are
the same until the network password is changed via the network. Once changed
over the network, the network password remains separate from the local Intel®
MEBx password.
The Intel MEBx password can always be changed via the Intel® MEBX user interface,
∙
regardless of the setting.
Local user consent is not required for a remote console to
establish KVM remote control session.
Local user consent is required for a remote console to
establish KVM remote control session.
Local user consent is required for SOL, IDER and KVM.
Allows changing the Intel
the network interface only if the default password
has not been changed yet.
Allows changing the Intel
network interface during setup and configuration
but not afterward. Once the setup and configuration
process is complete, the Intel MEBx password
cannot be changed via the network interface.
Allows changing the Intel
the network interface at any time.
®
MEBX password
®
MEBx password through
®
MEBx password via the
®
MEBx password through
Security
65