Page 1
eTrex Touch 25/35 ® Owner’s Manual July 2015 Printed in Taiwan 190-01836-00_0A...
Page 2
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements.
Introduction Turning On the Device Hold . WARNING Using the Touchscreen See the Important Safety and Product Information guide in the • Tap the screen to select an item. product box for product warnings and other important information. • Make each touchscreen selection a separate action. •...
Select an option: Select Track Manager. • To change the color of the track line on the map, select Select a track. Color. Select Color. • To display a line on the map indicating your track, select Select a color. Show On Map.
Select a unit of measure. You can create adventures to share your journeys with family, friends, and the Garmin community. You can group related Enter the distance, and select items together as an adventure. For example, you can create an Select Save.
For more information, Navigating a Driving Route go to http://buy.garmin.com or contact your Garmin dealer. Before you can navigate street routes, you must purchase and load City Navigator maps. Finding a Location Near Another Location Select Profile Change >...
™ Select Elevation Plot. A chirp is a small Garmin accessory that is programmed and left Swipe up from the bottom of the screen, and select > in a geocache. You can use your device to find a chirp in a Reset >...
Select chirp Searching > On. Calculating the Size of an Area Select Area Calculation > Start. Finding a Geocache with a chirp Walk around the perimeter of the area you want to calculate. Select Geocaching > Find a Geocache. Select Calculate when finished. Select a geocache.
10 m (32.9 ft.) away from other ANT+ navigation. accessories. • Select Activities (FIT) to record your activity with fitness • Bring the Garmin device within range 3 m (10 ft.) of the ANT+ information (for example, laps) that is tailored for Garmin accessory. Connect.
Select Setup > Accessibility > Touch Sensitivity. are activated and functioning correctly. Select an option. • When paired, your Garmin device receives data from only TIP: You can test the touchscreen settings with and without your accessory, and you can go near other accessories.
Lock On Road: Locks the blue triangle, which represents your USB Mode: Sets the device to use mass storage mode or position on the map, onto the nearest road. Garmin mode when connected to a computer. Battery Type: Sets the battery type for the device. Heading Settings About GPS and GLONASS You can customize the compass settings.
Save Always can be useful when you are watching for other. This allows your running activity to appear as a running pressure fronts. activity when you transfer it to Garmin Connect. Plot Type: Records elevation changes over a period of time or Setting Your Fitness User Profile...
Follow the on-screen instructions. Cleaning the Device Getting More Information NOTICE You can find more information about this product on the Garmin Even small amounts of sweat or moisture can cause corrosion website. of the electrical contacts when connected to a charger.
Deleting Files • JPEG photo files. NOTICE • GPI custom POI files from the Garmin POI Loader. Go to If you do not know the purpose of a file, do not delete it. Your www.garmin.com/products/poiloader. device memory contains important system files that should not •...
Appendix Distance To Next: The remaining distance to the next waypoint on the route. You must be navigating for this data to appear. Elapsed (Total) Time: The total time recorded. For example, if tempe you start the timer and run for 10 minutes, then stop the timer The tempe is an ANT+ wireless temperature sensor.
Location (lat/lon): The current position in latitude and longitude Vertical Dist to Next: The elevation distance between your regardless of the selected position format setting. current position and the next waypoint in the route. You must be navigating for this data to appear. Location (selected): The current position using the selected position format setting.