Jabra Sport Pace Wireless Blue
How do I pair my Jabra Sport Pace Wireless with my mobile
device?
To pair your Jabra Sport Pace Wireless with your smartphone, tablet, or
other mobile device, follow these steps.
1. Turn on the Bluetooth setting on your mobile device.
2. Turn off your Jabra Sport Pace Wireless by pressing and holding (3
seconds) the Multi-function button until the LED light flashes red.
3. To enter pairing mode, press and hold (5 seconds) the Multi-function
button on the controller until the LED on the left earbud flashes
blue.
4. To pair, go to the Bluetooth menu on your mobile device and select
the Jabra Sport Pace Wireless from the list of available devices.
Enter "0000" (four zeros) if you are asked for a pin code.
Note
If pairing is not successful, try the pairing steps again, or try pairing with
a different Bluetooth device. For troubleshooting tips,
Optionally, try using the
https://www.jabra.com/supportpages/jabra-sport-pace/100-97700002-
02/faq/bdc1fcdb-4a23-4639-86d8-70f1bb5cb30c
Bluetooth Pairing Guide
16/01/2024 03:14
see
here.
which provides detailed
Page 1 of 2