Table of Contents
Advertisement
en Basic settings
¡ The current software and hardware
version of your appliance.
¡ Status of any previous reset to
factory settings.
This initial registration prepares the
Home Connect functions for use and
is only required when you want to
use the Home Connect functions for
the first time.
Note: Please note that the
Home Connect functions can only be
utilised with the Home Connect app.
Information on data protection can be
retrieved in the Home Connect app.
Basic settings
18 Basic settings
You can configure the basic settings
Basic settings
for your appliance to meet your
needs.
Note: You can also adjust the the ba-
sic settings in the Home Connect
app.
18.1 Overview of the basic
settings
7
Programme selector with programme
positions
Set the volume of the signal
1
at the end of the programme:
0 (off) to 4 (very loud)
40
2
3
5
6
7
18.2 Changing the basic set-
To call up the basic settings, press
1.
and hold Options for approx. 3
seconds.
a The display shows
Use the programme selector to se-
2.
lect the required basic setting.
→ Page 40
Adjust the basic setting:
3.
To change the value, press
‒
or
To reset the appliance to the
1
‒
factory settings, press and hold
2
To save the changes, switch off
4.
the appliance.
3
4
5
6
Set the volume of the signal
tone emitted when the but-
tons are pressed:
0 (off) to 4 (very loud)
Set the display brightness:
1 (low) to 4 (very high)
Activate (On) or deactivate
(OFF) the reminder to clean
the drum.
Display the number of fin-
ished programmes.
Restore the appliance to the
factory settings (rES).
tings
.
for approx. 3 seconds.
.
Advertisement
Table of Contents
