Table of Contents
Advertisement
Buttons
8 Buttons
The selection of programme settings depends on the programme that is set.
Buttons
Button
(mains
switch)
Finish in
Options
Options
Speed Per-
fect
Selection
¡ Switch on
¡ Standby mode
¡ Restart the appli-
ance
Multiple selection
- 90
- 1400
¡ Start
¡ Cancel
¡ Pause
Up to 24 hours
¡ Displaying or hiding
additional buttons
Multiple selection
¡ Activate
¡ Deactivate
Description
Switch on the appliance or put it in
standby mode.
If the control panel does not respond,
press and hold
5 seconds to restart the appliance.
→ "The appliance is not working.",
Page 50
To change a setting, press the
selection button until the display
shows the required setting.
Adjust the temperature.
Set temperature in °C.
Adjust the spin speed or deactivate
the spin cycle.
Set spin speed in rpm.
If
is selected, the water is drained
and the spin cycle is deactivated. The
laundry stays wet inside the drum.
Start, cancel or pause the pro-
gramme.
Set the programme end time.
The programme duration is already in-
cluded in the set number of hours.
Once the programme has started, the
programme duration is displayed.
¡ If you briefly press the button, you
can display or hide additional but-
tons.
→ "Displaying or hiding additional
buttons", Page 21
→ "Basic settings", Page 40
Activate or deactivate a shorter pro-
gramme duration.
Note: Energy consumption increases.
The washing result is not affected by
this.
Buttons en
for approximately
or
25
Advertisement
Table of Contents
