BMW i7 Owner's Manual page 253

Turning the panoramic view on/off
1. Press the button.
2. "Panorama view"
To exit panorama view, select another
camera view on the left toolbar.
Display
Yellow lines on the screen display identify the
bumpers of your own vehicle.
Depending on the engaged selector lever posi-
tion, the camera view of the rearview camera
or front camera will be displayed.
Automatic activation of
panorama view
Principle
Positions at which panorama view should
switch on automatically can be saved as acti-
vation points.
General information
Up to ten activation points can be stored.
The activation points can be used when driv-
ing forward and, depending on national-mar-
ket version, when reversing.
Follow instructions in the Parking assistance
systems chapter.
Online Edition for Part no. 01405A88D67 - VI/23
Parking
Functional requirements
▷ A GPS signal must be received.
▷ Depending on national-market version: A
BMW ID or driver profile must be activated.
▷ The direction of travel, selector lever posi-
tion, and vehicle angle must correspond to
a stored activation point.
Storing activation points
1. Drive your vehicle to the location where you
want the system to turn on, then stop.
2. Press the button.
3. "Panorama view"
4. "Activation point"
The current position is displayed.
5. "Save activation point"
Activation points are saved with the following
information, for example:
▷ With the city/town.
▷ With the city/town and the street.
▷ With the GPS coordinates.
You can rename the location and street infor-
mation created automatically.
Using activation points
The use of activation points can be switched
on and off.
1. Apps menu
2. "Vehicle"
3. "Driving settings"
4. "Driver Assistance"
5. "Parking"
6. "GPS-based"
CONTROLS
253