BMW i7 Owner's Manual page 195

Functional requirement
The areas of the sensors must be clean and
clear.
Turning Active Blind Spot Detection
on/off
1. Apps menu
2. "Vehicle"
3. "Driving settings"
4. "Driver Assistance"
5. "Safety and warnings"
6. "Active Blind Spot Detection"
7. Select the desired setting.
Depending on vehicle equipment and national-
market version, the system activates automati-
cally whenever you start driving.
Adjusting the Active Blind Spot
Detection
Setting the warning time
1. Apps menu
2. "Vehicle"
3. "Driving settings"
4. "Driver Assistance"
5. "Safety and warnings"
6. "Active Blind Spot Detection"
7. Select the desired setting.
Setting the intensity of the steering
wheel vibration
1. Apps menu
2. "Vehicle"
3. "Driving settings"
4. "Driver Assistance"
5. "Feedback via steering wheel"
6. "Vibration intensity"
7. Select the desired setting.
Online Edition for Part no. 01405A88D67 - VI/23
Safety
The setting is applied to all collision warning
systems.
Depending on the national-market
version: turning steering intervention
on/off
1. Apps menu
2. "Vehicle"
3. "Driving settings"
4. "Driver Assistance"
5. "Safety and warnings"
6. "Active Blind Spot Detection"
7. "Steering intervention"
Warning function
Warning light in exterior mirror
The warning light in the exterior mirror warns
of a possible collision with a detected vehicle.
Prewarning
The dimmed warning light in the exterior mirror
indicates when vehicles are in your blind spot
or approaching from the rear.
Acute warning
When an acute warning occurs, the steering
wheel vibrates briefly. The warning light in the
exterior mirror flashes brightly.
An acute warning is issued if the following con-
ditions are met:
CONTROLS
195