BMW i7 Owner's Manual page 226

CONTROLS
Turning on Cruise Control with
distance control
1. If necessary, press the button.
2. If necessary, press the button re-
peatedly until distance control is selected.
Cruise control with distance control is active.
The current speed is maintained and stored as
desired speed.
The selected distance to a vehicle driving
ahead is maintained.
The indicator lights in the instrument cluster
illuminate and the mark on the speedometer is
set to the current speed.
The driving mode changes or Dynamic Stabil-
ity Control activates when Distance Control is
switched on.
Adjusting the speed
The speed can be set using the rocker button
on the steering wheel.
Additional information:
Cruise control, refer to page 222.
Interrupting Cruise control with
distance control automatically
The system is stopped automatically in the fol-
lowing situations, for example:
▷ When braking manually.
▷ Selector lever position D is disengaged.
▷ While Dynamic Stability Control is disabled.
▷ "SPORT PLUS": the settings for increased
driving dynamics are activated.
▷ While Dynamic Stability Control regulates
driving stability.
▷ Driver's seat belt and driver's door are
opened.
▷ The system has not detected objects for
an extended period, for instance on a
226
Driver assistance systems
Online Edition for Part no. 01405A88D67 - VI/23
road with very little traffic without curb or
shoulder markings.
▷ The detection range of the radar is im-
paired, for instance by contamination or
heavy precipitation.
▷ After a longer stationary period when the
vehicle has been braked to a stop by the
system.
Turning the speed control system
off/interrupting
The speed control system can be turned off or
canceled automatically or manually.
Additional information:
Speed control systems, refer to page 219.
Continuing cruise control while
driving
Warning
The set speed can be incorrectly adjusted
or called up by mistake. There is a risk of
accident. Adjust the set speed to the traffic
conditions. Watch surrounding traffic closely
and actively intervene where appropriate.
An interrupted cruise control can be continued
by calling up the stored speed. The difference
between the current speed and the stored
speed should be as little as possible.
Additional information:
Cruise control, refer to page 222.
Continuing cruise control while
vehicle is stationary
In certain situations, this system requires the
driver to confirm their intention to drive off.
The displays show the following: