Pioneer ODR PREMIER RS-A1 Owner's Manual page 8

This unit has three setting switches: address, network mode and fader. Set these
switches according to the purpose of the speakers to be connected to the amplifi-
er. Incorrect setting will result in improper operation of the ODR System.
Switching the setting
1. Change the setting of the switches using the T-shaped screwdriver
supplied with the amplifier.
> Keep the supplied T-shaped screwdriver in a safe place.
Supplied Setting switches
T-shaped
——_7.
screwdriver s '
Power indicator
(Lights up when ;
the amplifier is
|
@ Fader switch
switched ON.)
Reset button
@ Network mode switch
@ Address switch
2. Press the Reset button.
Always press the Reset button after changing a setting switch (see "Reset Button"
on page 13). Otherwise the new setting will not be registered.