Installing The Trigger Handle - Echo DPB-5800T Operator's Manual

ASSEMBLY
3. Install clamps to both ends of flex
pipe (10).
4. Install flex pipe to elbow pipe (11)
on blower.

Installing the Trigger Handle

1. Slide trigger handle (12) onto
swivel pipe (13) and loosely
attach tightening knob (14).
2. Attach swivel pipe to flex pipe.
Tighten both hose clamps.
3. Insert throttle cable into wire
holder clips, and secure clips.
4. Position trigger handle for
comfortable operation and tighten
knob.
18
DPB-5800T
11
12
13
99922238094
© 05/2023 ECHO Incorporated
10
14