Assembly; Install Blower Pipes / Stick Handle - Echo PB-461LN Operator's Manual

A
SSEMBLY
WARNING
Never perform maintenance or assembly procedures with engine
running or serious personal injury may result.
INSTALL BLOWER PIPES
1. Assemble clamps (A) onto both ends of flexible pipe (B).
2. Assemble swivel pipe (C) into flexible pipe (B) and tighten clamp
(A).
3. Assemble flexible pipe (B) to elbow (D) on blower and tighten
clamp (A).
NOTE
A light lubricant may be used to ease assembly of flexible pipe to
blower elbow.
4. Loosen wing nut (E) completely and open stick handle clamp.
5. Align notches (F) in handle clamp with tabs (G).
6. Slide stick handle onto swivel pipe (C). Stick handle should be
angled away from operator.
7. Position stick handle (H) for comfortable operation, and tighten
wing nut (E).
8. Assemble straight pipe (I) to swivel pipe (C), turning straight pipe
clockwise to lock in place.
9. Assemble curved pipe (J) to straight pipe (I) turning curved pipe
(J) clockwise to lock in place.
DANGER
/
STICK HANDLE
P B
OWER LOWER
O ' M
PERATOR S ANUAL
A
B
B
D
G
G
C
9
A
C
H
F
E
I
J