Lenovo ThinkSystem SR950 V3 System Configuration Manual page 35

Table 11. Lower processor board (MB) J201 switch block description (continued)
Jumper Name
Location
J201E CMOS clear
J201F Reserved
PJ1 switch block
The following table describes the functions of the PJ1 switch block on the lower processor board (MB).
Table 12. Lower processor board (MB) PJ1 switch block description
Jumper Name
Location
PJ1A Reserved
PJ1B Reserved
J02 switch block
The following table describes the functions of the J02 switch block on the lower processor board (MB).
Table 13. Lower processor board (MB) J02 switch block description
Jumper Name
Location
J02A Reserved
J02B Password clear
Reserved
J02C
J02D Reserved
J02E Reserved
J02F Reserved
Position Function
2-3 Reserved
1-2 (Default) Off
2-3 Resets the RTC. A momentary toggle
is all that is required. To avoid
excessive CMOS battery drain, do not
leave this switch in the On position.
Reserved
1-2 (Default)
2-3 Reserved
Position Function
1-2 (Default) Reserved
2-3 Reserved
1-2 (Default) Reserved
2-3 Reserved
Position Function
1-2 (Default) Reserved
2-3 Reserved
1-2 (Default) Normal
2-3
Overrides the power-on password.
Changing the position of this switch
does not affect the administrator
password check if an administrator
password is set.
Reserved
1-2 (Default)
2-3 Reserved
1-2 (Default) Reserved
2-3 Reserved
1-2 (Default) Reserved
2-3 Reserved
1-2 (Default) Reserved
2-3 Reserved
.
Chapter 2 Server components
27