BMW 2 GRAN COUPE Series Manual page 44

CONTROLS
The assignment of the buttons is displayed in
the upper area of the control display.
Deleting all button assignments
All button assignments can be deleted.
1. Press and hold buttons 1 and 8 at the same
time.
2. "OK"
Control display and
Controller
Principle
The iDrive functions are displayed on the con-
trol display.
Overview
1 Control display
2 Controller
Control display
Safety information
Warning
Devices connected to the vehicle via a cable
such as mobile phones or loose objects can
be thrown through the vehicle interior while
driving such as in the event of an accident,
braking or evasive maneuver. There is a risk
of injury and risk of damage to property. Se-
44
iDrive
Online Edition for Part no. 01405A89334 - VI/23
cure loose objects or devices that are con-
nected to the vehicle via a cable.
Warning
Objects in the area in the front of the control
display can slip and damage the control dis-
play. There is a risk of injury or risk of dam-
age to property. Do not place objects in the
area in front of the control display.
Switching on/off automatically
The control display is turned on automatically
when the vehicle is unlocked or as soon as the
control display is needed for operation.
In certain situations, the control display is
switched off automatically, for instance if no
operation is performed on the vehicle for sev-
eral minutes.
Switching on/off manually
The control display can also be switched off
manually.
1. Tip the Controller up.
2. "Screen off"
Press the Controller or any button on the Con-
troller to switch it back on again.
System limits
In the case of very high temperatures on the
control display, for instance due to intense so-
lar radiation, the brightness may be reduced
down to complete deactivation. Once the
temperature is reduced, for instance through
shade or air conditioning system, the normal
functions are restored.
OwnersManuals2.com