BMW 2 GRAN COUPE Series Manual page 158

Table of Contents

Advertisement

CONTROLS
General information
Follow instructions for cleaning the Head-up
display in the Vehicle Care chapter.
Overview
The protective glass of the Head-up display is
located in the position marked.
Turning on/off
1.
"CAR"
2.
"Settings"
3.
"Displays"
4.
"Head-up display"
5.
"Head-up display"
Display
Overview
The following information is displayed on the
Head-up display:
Vehicle speed.
Navigation instructions.
Check Control messages.
Selection list in the instrument cluster.
Driver assistance systems.
Sport displays.
Some of this information is only displayed
briefly as needed.
158
Displays
Online Edition for Part no. 01405A89334 - VI/23
Selecting displays in the Head-up
display
1.
"CAR"
2.
"Settings"
3.
"Displays"
4.
"Head-up display"
5.
Select the desired setting.
Setting the brightness
The brightness is automatically adjusted to the
ambient brightness.
The base setting can be adjusted manually.
1.
"CAR"
2.
"Settings"
3.
"Displays"
4.
"Head-up display"
5.
"Brightness"
6.
Turn the Controller until the desired bright-
ness is set.
7.
Press the Controller.
When the low beams are switched on, the
brightness of the Head-up display can be ad-
justed using the instrument lighting.
Adjusting the height
1.
"CAR"
2.
"Settings"
3.
"Displays"
4.
"Head-up display"
5.
"Height"
6.
Turn the Controller until the desired height
is reached.
7.
Press the Controller.
The height of the Head-up display can be
stored using the memory function.
OwnersManuals2.com

Advertisement

Table of Contents
loading

Table of Contents