Table of Contents
Advertisement
Changing between Cruise Control
with/without Distance Control
Safety information
Warning
The system does not react to traffic driv-
ing ahead of you, but instead maintains the
stored speed. There may be a risk of acci-
dents or risk of damage to property. Adjust
the set speed to the traffic conditions and
brake as needed.
Changing over the Cruise Control mode
Switching Cruise Control without Distance
Control off and on:
▷
Press and hold this button.
▷
Press and hold this button.
Switching on distance control:
▷
Press the button.
▷
Press the button.
After changing, a Check Control message is
displayed.
Displays in the instrument cluster
General information
Depending on the equipment version, the dis-
plays in the instrument cluster may vary.
Display in the speedometer
Depending on the equipment, a mark in the
speedometer displays the status of the sys-
tem.
Driver assistance systems
Online Edition for Part no. 01405A89334 - VI/23
▷
Green marking: system is ac-
tive, the marking indicates
the desired speed.
▷
Gray marking: system is in-
terrupted, the marking indi-
cates the stored speed.
▷
No marking: system is switched off.
Distance to vehicle ahead of you
Selected distance to the vehicle ahead of you
is shown.
Icon
Description
Distance 1
Distance 2
Distance 3
Distance 4
This value is set automatically
after the system is switched
on.
No distance control display, as
the accelerator pedal is being
pressed.
CONTROLS
201
OwnersManuals2.com
Advertisement
Table of Contents
