BMW 2 GRAN COUPE Series Manual page 200

CONTROLS
Press the button.
Changing the speed
Press the rocker switch up or down repeatedly
until the desired speed is set.
If active, the displayed speed is stored and
the vehicle reaches the stored speed when the
road is clear.
▷ Each time the rocker switch is tapped to the
resistance point, the set speed increases or
decreases by 1 mph/1 km/h.
▷ Each time the rocker switch is pressed
past the resistance point, the desired speed
changes by a maximum of 5 mph/10 km/h.
Hold the rocker switch in position to repeat the
action.
Adjusting the distance
Safety information
Warning
The system cannot serve as a substitute for
the driver's personal judgment. Due to the
system limits, deceleration can be late. There
may be a risk of accidents or risk of dam-
age to property. Be aware of the surround-
ing traffic situation at all times. Adjust the
distance to the traffic and weather conditions
and maintain the prescribed safety distance,
possibly by braking.
200
Driver assistance systems
Online Edition for Part no. 01405A89334 - VI/23
Reducing the distance
Press the button repeatedly until the
desired distance is set.
Instrument cluster will display selected dis-
tance.
Increasing the distance
Press the button repeatedly until the
desired distance is set.
Instrument cluster will display selected dis-
tance.
Continuing cruise control
Warning
The set speed can be incorrectly adjusted
or called up by mistake. There is a risk of
accident. Adjust the set speed to the traffic
conditions. Watch surrounding traffic closely
and actively intervene where appropriate.
An interrupted cruise control can be continued
by calling up the stored speed. The difference
between the current speed and the stored
speed should be as little as possible.
Press the button on the steering wheel with
the system interrupted:
Button on the steering wheel.
Cruise control is continued with the stored val-
ues.
In the following cases, the stored speed value
is deleted and cannot be called up again:
▷ When the system is switched off.
▷ When drive-ready state is switched off.
OwnersManuals2.com