BMW X1 Owner's Manual page 244

CONTROLS
General information
Follow instructions in the Parking assistance
systems chapter.
Functional requirements
The following functional requirements apply for
automatic activation of panorama view:
▷ A GPS signal must be received.
▷ Depending on national-market version: You
must activate a BMW ID or driver profile.
▷ The direction of travel, the selector lever
position, and the vehicle angle must match
a stored activation point.
Storing activation points
Desired activation points can be saved.
1. Drive your vehicle to the location where you
want panorama view to switch on automat-
ically, then stop.
2. Press the Park Assist key on the
center console.
3. Go through the menu as follows via iDrive:
"Panorama" / "Activation point" / "Save
activation point".
Activation points are saved with the following
information, for example:
▷ With the city/town.
▷ With the city/town and the street.
▷ A default name.
You can rename the location and street infor-
mation created automatically.
Using activation points
To enable or disable the use of activation
points, go through the menu as follows via
iDrive: Apps menu / "Vehicle" / "Driving
settings" / "Driver Assistance" / "Parking" /
"GPS-based".
244
Parking
Online Edition for Part no. 01405A8A536 - VI/23
Editing activation points
You can rename or delete specific activation
points or all of them.
1. Press the Park Assist key on the
center console.
2. Go through the menu as follows via iDrive:
"Panorama" / "Manage points".
A list of all saved activation points is dis-
played.
3. Select the desired setting.
Door opening angle
Principle
Depending on vehicle equipment, the door
opening angle display is shown automatically
when stationary.
This display helps estimate how far the doors
can be opened when parking.
If obstacle marking is activated, the parking
view indicates fixed obstacles that obstruct the
opening angles of the doors.
General information
Follow the information in the "Parking assis-
tance systems" chapter.
Display
The maximum opening angle of the doors is
displayed in selector lever position P.