BMW X1 Owner's Manual page 223

Icon Description
Warning light illuminates yellow:
Hands are not grasping the steering
wheel. The system is still active.
Grab the steering wheel with your
hands.
Warning light illuminates red, acous-
tic signal sounds:
The hands are not on the steering
wheel or, depending on the vehicle
equipment and national-market ver-
sion, the driver's line of sight is not di-
rected at the surrounding traffic. Yel-
low: System interruption is imminent.
The system reduces the speed to a
standstill if applicable.
It is possible that the system will
not execute any supporting steering
movements.
Immediately grasp the steering wheel
with your hands and pay attention to
the surrounding traffic.
Depending on the vehicle equipment and na-
tional-market version, a Check Control mes-
sage is displayed if the Driver Attention Cam-
era detects that the driver is inattentive.
Depending on vehicle equipment and national-
market version, in Assisted View, Assisted
Driving Mode information is displayed on the
central display area of the instrument cluster.
Additional information:
Assisted View, refer to page 143.
Driver assistance systems
Online Edition for Part no. 01405A8A536 - VI/23
Displays on the steering wheel
Similar to the displays for Assisted Driving
Mode on the instrument cluster, the two LEDs
above the keypads on the steering wheel illu-
minate.
1. To turn the displays on the steering wheel
on/off, go through the menu as follows via
iDrive: Apps menu / "Vehicle" / "Driving
settings" / "Driver Assistance" / "Feedback
via steering wheel" / "Light elements".
2. Select the desired setting.
Displays in the Head-up display
Depending on vehicle equipment, Assisted
Driving Mode information can also be shown
on the Head-up display.
Setting the intensity of the steering
wheel vibration
1. To adjust the steering wheel vibration in-
tensity, go through the menu as follows
via iDrive: Apps menu / "Vehicle" / "Driving
settings" / "Driver Assistance" / "Feedback
via steering wheel" / "Vibration intensity".
2. Select the desired setting.
This setting is applied to all collision warning
systems.
CONTROLS
223