GENERAL INFORMATION
INTRODUCTION
Your ULV cold fog generator, known from this point on in this manual as "ULV Sprayer", was
built to the highest standards in the industry. However, the prolonged life and maximum
efficiency of your sprayer equipment depends on you following the operating, maintenance and
adjustment instructions in this manual.
If additional information or service is needed, contact AZELIS A&ES or if applicable, your
authorized AZELIS A&ES service representative.
We encourage you to contact AZELIS A&ES for repairs. As the designer and manufacturer of
this equipment, AZELIS A&ES professionals are informed and trained on the latest methods to
service this equipment and provide prompt and efficient service in the field or at the service
shop and carry a full line of Guradian ULV service parts and accessories.
THE REPLACEMENT OF ANY PORTION THIS PRODUCT BY OTHER THAN THE
MANUFACTURER'S AUTHORIZED REPLACEMENT PART MAY ADVERSELY AFFECT THE
PERFORMANCE, DURABILITY OR SAFETY OF THIS PRODUCT. USE OF OTHER THAN
AZELIS A&ES/GUARDIAN ULV REPLACEMENT PARTS WILL VOID THE WARRANTY.
For some pictoral clarity, some illustrations and fugures in this manual may show shields,
guards, or shrouds removed. Under no circumstances should your ULV sprayer be operated
without these devices in place.
All information is based upon product information available at the time of approval for printing.
AZELIS A&ES reserves the right to make changes at any time without notice and without
incurring any obligation.
SERVICING THE ENGINE
The detailed servicing and repair of the engine is not covered in this manual; only routine
maintenance and general service instructions are provided. For service of the engine during the
limited warranty period, it is important to contact AZELIS A&ES and if applicable, an authorized
AZELIS A&ES service representative or an authorized servicing agent of the engine
manufacturer.
Any unauthorized work done on the engine during the warranty period may
U
void your warranty.
DIRECTION REFERENCE
The "Right" and "Left", "Front" and "Rear" of the machine are refereced from the operator's
right and left when standing behind the vehicle and facing in the normal forward direction of
7