ASROCK H510M-H/M.2 SE Setup Manual page 37

H510M-H/M.2 SE
VCCST Voltage
Configure the voltage for the VCCST.
Configuration options: [Auto] [0.950V] - [1.350V]
AVX Configuration
AVX2 Voltage Guardband Scale Factor
AVX2 Voltage Guardband Scale Factor controls the voltage guardband applied to AVX2
workloads. A value > 1.00 will increase the voltage guardband, and < 1.00 will decrease the
voltage guardband.
AVX-512 Voltage Guardband Scale Factor
AVX-512 Voltage Guardband Scale Factor controls the voltage guardband applied to AVX-
512 workloads. A value > 1.00 will increase the voltage guardband, and < 1.00 will decrease
the voltage guardband.
Save User Default
Type a profile name and press enter to save your settings as user default.
Load User Default
Load previously saved user defaults.
Save User UEFI Setup Profile to Disk
It helps you to save current UEFI settings as an user profile to disk.
Load User UEFI Setup Profile from Disk
You can load previous saved profile from the disk.
33