ASROCK H510M-H/M.2 SE Setup Manual page 27

H510M-H/M.2 SE
Configuration options: [Enabled] [Disabled]
Boot Performance Mode
Select the performance state that the BIOS will set before OS handoff. Default is [Auto]
mode.
[Turbo Performance] will keep CPU turbo-ratio till OS handoff.
[Max Non-Turbo Performance] will keep CPU Flex-ratio till OS handoff.
[Max Battery] will set CPU ratio as x8 till OS handoff. This option is suggested for BCLK
overclocking.
Ring to Core Ratio Offset
Disable Ring to Core Ratio Offset so the ring and core can run at the same frequency.
Configuration options: [Enabled] [Disabled]
Intel SpeedStep Technology
Intel SpeedStep technology allows processors to switch between multiple frequencies and
voltage points for better power saving and heat dissipation. CPU turbo ratio can be fixed
when Intel SpeedStep Technology is set to Disabled and Intel Turbo Boost Technology is
set to Enabled.
Configuration options: [Enabled] [Disabled]
Intel Turbo Boost Technology
Intel Turbo Boost Technology enables the processor to run above its base operating
frequency when the operating system requests the highest performance state.
Configuration options: [Enabled] [Disabled]
Intel Speed Shift Technology
Allows you to enable or disable the Intel Speed Shift Technology support. Enabling will
expose the CPPC v2 interface to allow for hardware controlled P-states. To get the best
support for Intel Turbo Boost Max Technology 3.0 (ITBMT 3.0), you have to enable Intel
Speed Shift Technology. If your CPU does not support ITMBT 3.0, option will still be
grayed out.
Configuration options: [Enabled] [Disabled]
Intel Turbo Boost Max Technology 3.0
Allows you to enable or disable the Intel Turbo Boost Max Technology 3.0 (ITBMT 3.0)
support. Disabling will report the maximum ratio of the slowest core in _CPC object.
23