Download Print this page

Vertex Standard Pilot III Brochure page 2

Rugged air band transceiver
Hide thumbs Also See for Pilot III:

Advertisement

ULTRA RUGGED, SUBMERSIBLE
CASE CONSTRUCTION
The Pilot III is built inside a rugged Aluminium
case, carefully sealed to protect against water
ingress. Built to survive immersion in water for
up to 30 minutes at a depth of three feet, the
Pilot III can keep you communicating even if it
gets wet if you have to ditch!
DIRECT FREQUENCY ENTRY VIA EASY-TO-READ
BACK-LIT KEYPAD
For quick access to operating
frequencies, simply enter the
frequency information directly
from the 16 button keypad, then
press the "Push To Talk" (PTT)
button to transmit. There's
no need to store frequencies
in memory before you can
operate on them.
5 WATTS OF CLEAN POWER OUTPUT
For reliable communications over difficult
communications paths, the VXA-300 provides 5
Watts of transmitter power (1.5 W carrier).
With its excellent audio clarity, the VXA-300's
transmitter will get your message through!
RECEIVER AUDIO PITCH CONTROL
For improved reception under difficult conditions,
the receiver's audio frequency response may be
quickly adjusted by the user, to enhance either
the high-frequency or low-frequency components,
depending on the noise and/or interference
encountered. A Vertex Standard exclusive!
250 MEMORY CHANNELS
The 150 regular memory channels and 100 pre-
programmed "Book" memory channels can
store just about any commonly-used operating
frequencies that you choose. And the memories
may be labeled with an Alpha-numeric title of
up to 8 characters, for easy recognition.
ONE TOUCH SQUELCH CONTROL
Breaking the squelch threshold has never been
easier. Press the monitor (MON) button for two
seconds to open the Pilot III's squelch
continuously. Press MON again to restore the
original squelch settings. This is TRUE one-
handed operation, without the need to fumble
around with tightly spaced concentric knobs.
SUPPLIED ACCESSORIES:
Ni-MH Battery Pack (7.2V, 1400mAh) FNB-83
Charger Cradle CD-28
Helical Antenna ATV-10
ACCESSORIES & AVAILABLE OPTIONS
MH-44
VAC-370B/C/U*
B4B
Speaker Microphone
Rapid Desktop Charger
*B for 120 VAC/C for 220-240 VAC/U for 220-240 VAC
About this brochure: We have made this brochure as comprehensive and factual as possible. We reserve the right, however, to make changes at any time in equipment, optional accessories,
specifications, model numbers, and availability. Precise frequency range may be different in some countries. Some accessories shown herein may not be available in some countries. Some
information may have been updated since the time of printing; please check with your Authorized
VERTEX STANDARD CO., LTD.
4-8-8 Nakameguro, Meguro-ku, Tokyo 153-8644, Japan
For our latest product news, visit us on the Internet:
http://www.vxstd.com
2004.0610NA(U/E)
Professional-Grade Airband Monitoring with
VXA - 300
VOR Navigation Display
VOR NAVIGATION DISPLAY
DVOR TO AND FROM DISPLAY
COURSE Indicator "TO"-"FROM" Flag Indicator
DVOR MODE
CDI MODE
"TO"-"FROM" Flag Indicator
RECEIVE BATTERY SAVER
This feature is designed to maximize the life of
the transceiver's battery. When the
the standby mode the battery saver de-energizes
the transceiver's circuitry, waking it up at user-
selected intervals to sample for radio activity. If
no activity is detected the
sleep mode. Current consumption is minimized,
thereby maximizing battery life. This feature is
only found on
Vertex Standard
NOAA WEATHER CHANNELS (U.S.A. Only)
The
Pilot III
broadcast frequencies. The Automatic Active
Weather Channel Locator (a
exclusive) automatically scans for active NOAA
weather stations in your area when WX band is
selected.
VERSATILE SCANNING FEATURES
The VXA-300's versatile scanning capability allows
you to monitor a number of different channels
efficiently. The VXA-300 will scan the COM band,
main or Book memories, or the Weather band
(U.S. version), and also includes provision for
Dual Watch and Priority Revert Dual Watch that
always ensures transmission on a "Priority"
channel.
PA FEATURE
When the optional MH-44
microphone is used, the VXA-300 may be used
as a portable Public Address system, with user-
programmable configuration available for the
voice monitoring in a headset.
Quick Draw Belt Clip CLIP-14
E-DC-5B
DC Adapter
FBA-25A
with Noise filter
Alkaline Battery Case
B9200461 Printed in Japan
AUTOMATIC BEARING CENTERING SYSTEM
COURSE Indicator
COURSE Deviation Needle
OVERFLOW Indicator
Pilot III
is in
Pilot
goes back into its
Airband transceivers.
can receive all 10 NOAA weather
Vertex Standard
or other external
B4B
Overnight Charger NC-88B/C*
Headset Cable CT-96
Operating Manual
E-DC-6
DC Cable;
CN-3
plug and wire only
Antenna Adapter
Vertex Standard
Dealer for complete details.
VERTEX STANDARD
US Headquarters
10900 Walker Street, Cypress, CA 90630, U.S.A.
YAESU EUROPE B.V.
P.O. Box 75525, 1118 ZN Schiphol, The Netherlands
YAESU UK LTD.
Unit 12, Sun Valley Business Park, Winnall Close
Winchester, Hampshire, SO23 0LB, U.K.
VERTEX STANDARD HK LTD.
Unit 5, 20 /F., Seaview Centre, 139-141 Hoi Bun Road,
Kwun Tong, Kowloon, Hong Kong
(
NAV BAND
108.000 - 117.975 MHz
Press and Hold
key 2 seconds to toggle
the DVOR Radial Digits to the larger Display
area.
COURSE Indicator
COURSE Deviation Needle
TWO - Degree Deviation Marks
"TO"-"FROM" Flag Indicator
General VOR Equipment
OTHER FEATURES
•Automatic Noise Limiter •Ambient Temperature
monitor •One-Touch Squelch (Monitor) Control
•External DC Jack (12V) •Battery Voltage Display
•8.33 or 25 kHz Channel Steps •Stop Watch and
Count Down Timers •Easy-to use Menu System
for Custom Configuration •PC Programmable
3-WAY DISPLAY TITLING AND BACK-LIT DISPLAY
Easy to use, versatile access to channel information
is critical to successful transceiver operation. Only
Vertex Standard Airband transceivers offer you
one-keystroke access to three different methods of
displaying memory channel information: Frequency,
Channel Number, or Alpha-Numeric title.
Frequency
Channel Number
SPECIFICATIONS
General
Frequency range: TX: 118.000 - 136.975 MHz
RX: 108.000 - 136.975 MHz,
Weather Channels (WX-01 - WX-10: USA version only)
Channel Spacing: 25 kHz/8.33 kHz (8.33 kHz: RX only)
Operating Modes: TX: AM;
RX: AM & FM (FM: for receiving the Weather
Channels, USA version only)
Supply Voltage:
6.0-15.0 V DC
Current Consumption: 20 µA (power off), 20 mA (battery saver on,
saver ratio 1:5), 60 mA (squelch on),
270 mA (receive), 0.9 A (transmit 1.5 W Carrier)
Temperature Range: +14° F to +140° F (
10° C to +60° C)
Case Size (WxHxD): 2.4" x 4.7" x 1.2" (w/FNB-83)
(60 x 120 x 32 mm)
Weight (approx.): 13.7 oz (390 g) with FNB-83 and antenna
Receiver
Circuit Type:
Double-conversion Superheterodyne
IFs:
35.4 MHz and 450 kHz
Better than 0.8 µV (for 6 dB S/N with 1 kHz, 30 % modulation)
Sensitivity:
Selectivity:
>8 kHz/–6 dB
Adjacent Ch. Selectivity: <25 kHz/–60 dB
AF Output (@7.2 V): 0.8 W @ 16 Ohms, 10 % THD
Transmitter
Power Output:
5.0 W (PEP), 1.5 W (Carrier Power) @ 7.2 V DC
Frequency Stability: Better than ±10 ppm
(+14° F to +140° F ,
10° C to +60° C)
Modulation System: Low Level Amplitude Modulation
Spurious Emission: > 60 dB below carrier
Int. Microphone Type: Condenser
Ext. Mic. Impedance: 150 Ohms
Specifications are subject to change without notice or obligation.
http://www.vertexstandard.com
E-mail:
yaesuavionics@vxstdusa.com
Phone 714/827-7600; Fax 714/827-8100
http://www.yaesu.co.uk
E-mail: sales@yaesu.co.uk
http://www.vxstd.com.hk
)
0
'180'
8 Character Alpha Numeric

Advertisement

loading

This manual is also suitable for:

Vxa-300Pilot iii vxa-300