GE 325 Product Manual page 52

SECTION 6
Table 6-1. General Troubleshooting
| PROBLEM | PROBAGLE CAUSE POSSIBLE SOLUTION |
etre > to Rate or Level switch | pattern Memory switch is ON. Set Pattern Memory switch OFF.
No ultrascund simulation ECG Mode switch is not OFF. Set ECG Mode switch OFF.
No FECG or MECG simulation position. te/CMR switch in CMR (RATE) ate MR switch to the left
No UA simulation pos Level GMR switch in CMR (LEVEL) position! switch to the left
Troubleshooting + 6-3