Disc Playing - Jensen CD-470 Instruction Manual

Am/fm stereo compact disc player
Table of Contents

Advertisement

DISC PLAYING
GETTING STARTED
1. Set the VOLUME control to low level,
Z
Press the CD door open button to open the CD compartment,
3l
Place a disc onto the spindle inside the CD compartment with label side in front,
4
Close the CD door.
5.
Set the CD / RADIO / AUX IN switch to CD position,
6l
Set the power ON / OFF switch to ON position to turn on the power, the power LED will
turn on.
7.
After the disc is read, the display will show the total track numbers and then the
disc will stop.
a
Press the PLAY / PAUSE button once, the disc will start playing from the beginning.
9,
Adjust the VOLUME to desired level,
10.
To turn off
the CD function, press STOP to stop the playback and set the POWER ON /
OFF switch to OFF position, the power LED will turn off.
GENERAL OPERATION
Play / Pause
Button
Ml
Press once to start playback in the original order
The'^^"'
show on the display.
Press again to stop the disc play temporarily.
The'^^^ will flash.
FR/FF-Skip/Search Biittoes ^44
Press once to skip to next track ►W or back to previous track
Press continuously to search forward
or backward
\44
^
Repeat Button
1. During play mode, press once to play a track repeatedly. The Repeat Indicator,
" CID
will
appear
and
flash
in
the Display.
2. During play mode, press twice to play the entire disc repeatedly. The Repeat
Indicator,
"
", will be shown steadily in the Display.
3. To cancel the repeat function, press repeatedly until the Repeat Indicator,
CT) " disappears in the Display.
SHUF - Shuffle Button ( For Random Play)
1.
Press the SHDF button once, the SHUF will show on the display.
Z
Press the PLAY/PAUSE button ( if in stop mode) , all tracks on the disc will be played in
random sequence, after all the tracks have been played, the disc will stop automatically.
Stop Button
Press once to stop playback.
PROG-Program play
1.
In stop mode, press the PROG button once, the display will show '^PGM 01* then change to
*PGM 00* and flash,*01* means program number,
*00* means track number. (Press the STOP
button to cancel)
EN-4

Advertisement

Table of Contents
loading

Table of Contents