Table of Contents
Advertisement
Z Pressot^M button to select the desired track-
Z
Press PROG button again to enter the track into meDiory, the display will show ^PGM 02*
then change to *PGM 00*, *02* means the prograjn number increase one step,
4
Repeat step 2 & 3 to program the order of more tracks up to 20 tracks can bo programmed
into memory.
E
Press PLAY/PAUSE button
HI
to Start the program play,
6l
To stop the program play, press the STOP button.
7.
For program play in step *6*, press the PROG button &HI button.
8*
To check the program memory, in program play mode, press the
or \4i4 button. Or in
stop mode, press the PROG button repeatedly, the display will show the program number
then quickly change to track number,
9.
To erase the program memory, open the door or turn off the power.
AUX IN
OPERATION
You can play other music sources (MP3 player or other digital audio player) through the speakers
of this unit by connecting the AUX l.N JACK to your external players LINE OUT JACK or
HEADPHONE JACK.
1.
Set the POWER
ON/OFF switch to OFF position, set the volume to low level.
Z
Use an audio cable with two terminals that are 3. Sam plug (not supplied), plug one end into
the AUX IN JACK and the other end to the LINE OUT / HEADPHONE JACK of your digital
audio player.
a
Set the CD/RADIO/AUX IN switch to AUX IN position.
4
Set the POWER ON/OFF switch to ON position to turn on the power, the power LED will
turn on.
5.
Play your digital audio player
6l
Adjust the VOLUME CONTROL for your desired listening level.
7.
To turn OFF the AUX IN
function, set the POWER
ON/OFF switch to OFF position,, the
power LED will turn off .
HEADPHONE JACK
You can use a earphone / headphone to listen to music.
L
Adjust the volume to low level.
Z
Insert a earphone / headphone into this jack.
3,
Adjust the volume to your desired level.
*The speaker sound will cut off when you insert a earphone / headphone into this jack.
MAINTENANCE
Cleaning the Lens
If the lens becomes dusty, clean it with a camera lens blower. Be careful not to scratch the
surface of the lens.
Cleaning the Cabinet
From time to time, clean the cabinet with a soft dry cloth. For more stubborn stains,
Slightly moisten the cloth with water or a mild detergent solution. Never use benzene,
alcohol or other solvents as they may damage the finish of the cabinet.
EN-5
Advertisement
Table of Contents
